![]() Place the casting frame upright with the pressure cams in the open position and facing forward on a flat surface.ī. Glass Cassette and Casting Stand Assembly Note: All glass plates should be clean and dry.Ī. *IEC61010-1 and EN61010-1 are internationally accepted electrical safety standards for laboratory instruments.ġ. Void the IEC61010-1 and EN61010-1 certifications, andīio-Rad is not responsible for any injury or damage caused by use of this instrument for purposes other than those for which it is intended or by modifications of the instrument not performed by Bio-Rad or an authorized agent.This instrument should not be modified or altered in any way. Certified products are safe to use when operated in accordance with the instruction manual. Important: This Bio-Rad product is designed and certified to meet IEC61010-1 and EN61010-1* safety standards. Do not attempt to use the cell without the safety lid. Always turn off the power supply before removing the lid. The current to the cell is broken when the lid is removed. ![]() ![]() The current to the cell enters the unit through the lid assembly, which provides a safety interlock to the user. Regardless of the power supply used, the maximum specified operating parameters for the Mini-PROTEAN Tetra cell are as follows All Bio-Rad power supplies meet this important safety requirement. The output of this power supply must be isolated from external ground to ensure that the DC voltage output floats with respect to ground. Power to the Mini-PROTEAN Tetra cell is supplied by an external DC voltage power supply (not included). Rubbing the combs with TEMED prior to casting will destroy the structural integrity of the combs over time. The Mini-PROTEAN are not compatible with repeated exposure to 100% TEMED. Call 1-800-4-BIORAD (US) or your local Bio-Rad representative for technical information regarding chemical compatibility of the Mini-PROTEAN Tetra cell with various laboratory reagents. Use of organic solvents voids all warranties. Mini-PROTEAN Tetra cell components are not compatible with acetone or ethanol. Pressure levers that seal the gel cassette The casting stand secures the gel cassette Short plate form one gel cassette assembly. To form the gel cassette sandwich prior to Spacer plate and the short plate together Plate that combines with the spacer plate The short plate is the shorter, flat glass Spacer plates are available in 0.75 mm, 1.0 The spacer plate is the taller glass plate To get the best performance from your Mini-PROTEAN Tetra Cell, familiarize yourself with the components by assembling and disassembling the cell before using it (refer to Figures 1 and 2). Tank is compatible with other Bio-Rad electrode modules for tank blotting, 2-D electrophoresis, and electroelution. The cell can run one or four gels, and the mini The Mini-PROTEAN Tetra system includes a casting stand and glass plates with permanently bonded gel spacers that simplify handcasting and eliminate leaking during casting. The Mini-PROTEAN ® Tetra cell runs both handcast gels and Ready Gel ® precast gels interchangeably. ProteinChip Qualification and Calibration Kits 2.ProteinChip Fractionation and Purification Products.PROTEAN Plus Hinged Spacer Plates and Combs.Profinity eXact Purification and Tag Cleavage Consumables.Profinia Protein Purification System Kits.Profinia Protein Purification System Buffers and Reagents.Profinia Protein Purification System Accessories.Profinia Protein Purification Instrument 3.Prepacked Gravity Flow Columns for Ion Exchange.Precision Plus Protein Prestained Standards.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |